Correct operation and maintenance of rotary drum sludge dryer

Rotary drum sludge drying machine is a kind of environmental protection mechanical equipment specialized in treating all kinds of sludge. In the daily use of this kind of equipment, we need to do a good job in the correct operation and maintenance of the equipment, so as to improve the production efficiency of the equipment, reduce the failure rate, and extend the service life of the equipment.

1. Before the rotary drum sludge dryer is officially used, it needs to go through a certain trial period, commonly known as "running in period". During this period, operators need to pay attention to check whether the equipment installation is wrong and whether the equipment is abnormal during operation. If it is found that the equipment is installed incorrectly, it is necessary to rectify the equipment in time. If the equipment is abnormal in the process of operation, it is necessary to solve the equipment fault in time; if it is found that the equipment production can not meet the requirements, it is necessary to adjust the equipment in order to meet the production requirements.

2. After entering the normal production operation, it is necessary to carefully check whether the connecting parts of the equipment are normal and whether the lubricating oil between the equipment is sufficient or polluted before starting the rotary drum sludge dryer every time. If the parts are loose, damaged or lack of lubricating oil, it is necessary to fasten or replace the equipment parts immediately, and add lubricating oil.

3. During the operation of the rotary drum sludge dryer, the operator needs to check the fastening of all parts of the equipment and whether the lubricating oil is sufficient from time to time. At the same time, we also need to pay attention to check the material feeding and discharging conditions. If the blockage is found, the operator needs to dredge it in time, so as to avoid causing equipment blockage and affecting the normal operation of the equipment.

4. After the shutdown of the rotary drum sludge dryer, it is necessary to clean the inside and outside of the equipment in time, so as to avoid the corrosion of the residual materials inside the cylinder and ensure the smooth operation of the equipment next time.

5. According to the maintenance plan of the rotary drum sludge dryer, the operators need to maintain the equipment regularly, replace the easily damaged parts regularly, and replace the lubricating oil of the equipment. At the same time, it is necessary to carry out the overall maintenance work on the equipment regularly to ensure the stable production and operation of the equipment and extend the service life of the equipment.