Operation instructions for prolonging the service life of leather sludge drying equipment

At present, people no longer use simple landfill and random disposal of leather sludge, but use leather sludge drying equipment to remove the moisture in leather sludge, so as to achieve the purpose of volume reduction and resource utilization. Leather sludge drying equipment can be dried to different degrees according to different drying requirements (yield, moisture content). But at present, although many friends have introduced the production line of leather sludge drying equipment, they are not very familiar with the operation of the equipment and do not know how to set the equipment parameters. In fact, in the normal operation of the equipment, standardized operation can not only improve the output and quality of the equipment, but also effectively extend the service life of the leather sludge drying equipment.

Operation instructions for prolonging the service life of leather sludge drying equipment

1. The drying equipment of leather sludge was started. After the equipment is installed, it can not enter the normal production operation immediately, but needs to go through the commissioning to ensure that there will be no fault after it is put into production. First of all, it is necessary to carry out no-load test of the equipment, and check whether the equipment runs abnormally under no-load condition. Then, it is necessary to gradually add materials to carry out on load test, and it can be formally put into operation after there are no problems.

2. Generally speaking, leather sludge drying equipment manufacturers will provide pre job training and equipment operation instructions. The operators should master the equipment operation knowledge and the drying requirements of materials, and operate in strict accordance with the regulations.

3. In the process of normal operation of the equipment, attention should be paid to the control of the moisture content and feed volume of the feed, and the principle of appropriate amount and uniform feed should be followed to avoid the phenomenon of blocking and uneven drying caused by excessive one-time feed exceeding the working load of the equipment.

4. Pay attention to the temperature of the equipment cylinder. If the temperature is too high or too low, it will affect the quality of the finished product after drying. Therefore, it is necessary to pay attention to whether the temperature of the cylinder is abnormal during the operation of the equipment, so as to ensure that the materials are dried in a suitable drying environment.

5. Clean up regularly. After long-term operation of the equipment, maintenance personnel are required to clean the equipment, and timely check whether the parts of the equipment are abnormal, so as to ensure the smooth progress of daily production of leather sludge drying equipment.