How to use heavy metal sludge dryer correctly

Heavy metal sludge is produced in electroplating, steel plant, printing and dyeing industry. Heavy metal sludge dryer can better treat and dispose the sludge, and provide a favorable guarantee for the further utilization of sludge resources. In the process of long-term use of the equipment, there will be different degrees of aging between various parts, which reduces the working performance of the equipment.

1、 For the newly purchased heavy metal sludge dryer, users need to strictly follow the manufacturer's technical personnel's guidance when installing it, and install the equipment correctly and without error, so as to ensure the smooth installation of the equipment, so as to avoid abnormal operation of the equipment.

2、 After the installation, the equipment needs to be debugged. The debugging work is divided into two steps, one is no-load operation, that is, without adding materials, directly run the equipment. The second is load operation, that is, adding materials for drying. No matter which one, we need to do a good job in the inspection of the equipment, so as to ensure the stable operation of the later equipment.

3、 After debugging, the equipment can enter the formal operation. Users need to operate correctly in strict accordance with the manufacturer's instructions. In addition, it is necessary to inspect the equipment from time to time to avoid the deformation of the cylinder due to the local high temperature during the heating process. Or the equipment is blocked, affecting the production and operation of the equipment.

4、 Once it is found that the heavy metal sludge dryer has abnormal noise or blockage, it is necessary to stop the machine immediately for inspection and discharge the equipment failure before production operation. If the user is unable to solve the equipment fault, he needs to seek the help of the manufacturer and ask the technical personnel of the manufacturer to solve it.

5、 When the sludge dryer is shut down, it is necessary to stop the feeding until the discharge of the dryer is finished. After the drying operation, the user also needs to clean up the residual sludge inside the equipment cylinder, so as not to affect the next operation and production.

6、 Users also need to develop a detailed heavy metal sludge dryer maintenance plan, which is to ensure the stable operation of the equipment production, but also to extend the service life of the equipment.