Daily maintenance of large sludge drying equipment

1. Take daily protective measures. Although protective measures can not prevent the occurrence of dangerous situations, they can reduce the degree of loss to a certain extent, so it is very important to take protective measures in place. Before each production, we should do a good job of inspection, eliminate the possibility of failure in advance or reduce the probability of failure, which can greatly reduce the economic loss.

2. Parts maintenance and replacement. When the large sludge drying equipment is used for a long time, the belt may be loose, fall off or broken. In view of this problem, the solution is very simple, just need to replace the new belt.

3. Pay attention to electricity safety. Always check whether the contact of each switch is good, whether the fuse is burnt out, and whether the position of the motor is correct.

4. Clean the equipment in time. After the large-scale sludge drying equipment has been used for a long time, it is necessary to send someone to clean the equipment, and timely check whether the parts of the equipment are abnormal, so as to ensure the normal operation of the daily production of the dryer, so as to improve the durability and service life of the equipment.

5. Operate the equipment as required. Operators need to be trained before they can operate the equipment, and they should strictly follow the operation specifications to ensure the drying quality and avoid accidents. Before the large-scale sludge drying equipment is officially put into operation, the idle test must be carried out to ensure the normal operation of the equipment before the production process. In the production process, pay attention to the control of equipment parameters, feeding control, feeding control, etc.

6. In the process of dust removal system of large-scale sludge drying equipment, it is mainly to ensure the normal operation of impeller feeder or air lock valve under the ash hopper, as well as anode rapping and cathode rapping.

7. Timely add grease and oil to all parts of the equipment, regularly check whether the machine has abnormal sound, and regularly check whether the parts are missing.